Cisco CCNA Learning Contents
Cisco CCNA Learning Contents
In the CCNA course
the student will be able to define routing protocols, describe the switching
process; describe routing requirements of remote and central nstallations and
list appropriate router models; understand in depth knowledge of IpV4 and a
basic understanding of IpV6; describe the steps of the startup sequence; define
the Cisco IOS and the CLI; list commands to load Cisco IOS software from flash
memory, a TFTP server; define functions and procedures for router configuration,
given a multi-router computer lab, check an initial configuration using the
setup command, log in to a router in both user and privileged modes, prepare
to backup, upgrade Cisco IOS software image, configure and verify IP addresses,
prepare the initial router configuration and enable IP, and add RIP, IGRP, EIGRP,
OSPF protocols to the configuration, all with complete accuracy.
The student will also be able to describe LAN segmentation using routers and
switches; describe procedures and options for designing a LAN; describe techniques
for configuring a router to use IP; use and implement extended and named / extended
access lists, describe procedures to verify and monitor access lists and manage
traffic; describe methods of firewall implementation using routers; define cut-through
and store-and-forward LAN switching; describe specifications of Fast Ethernet
and Gigabit Ethernet options; describe VLAN benefits, implementation methods,
and communication; define the Spanning Tree Protocol (STP) and its uses.
The student will be able to list common devices for a WAN infrastructure; list types of WAN connectivity; list commands to configure Frame Relay LMIs, given a multiple router / computer lab, configure specified IP addresses and encapsulation type; configure standard access lists and extended access lists for IP traffic; monitor and verify access list operations as specified; given two scenarios describing real-world network problems, identify the factor(s) responsible and recommend (and justify) a solution.
Advanced Routers
and Switches will be coming for CCNA Class.
A wide range TEN (3600 and 2500 Routers and 2900 Series .
Essentials in Routing Technologies
| Subject | Contents |
| CCNA | Introduction to Internetworking. |
| Introduction to TCP/IP using VLSM ( Variable Length Subnet Mask) and Troubleshooting TCP/IP V4. |
|
| Using Cisco’s IOS ( Internetwork Operating System. |
|
Configuring basic Router commands using CLI( command Line Interface). |
|
Configuring and troubleshooting WAN protocols like RIP, OSPF, IGRP, EIGRP, Frame Relay, ISDN. |
|
Installing and configuring Switches using CLI. |
|
Install, configure and troubleshoot Virtual Lan’s. |
|
| Configure and troubleshoot Security using Standard Access Lists and Extended Access Lists. | |
Understanding and configuring IPv6 on Routers. |
|
| Configuring NAT (Network Address Translation) using Static, Dynamic and PAT (overloading |